♥♥ 2017 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 642-832 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 642-832 Exam Dumps (PDF & VCE):
Available on: http://www.exam.com/642-832-dumps.html


However, Pass4sure may be the leading origin provider of the Cisco 642-832 exam practice components. If you take help from Pass4sure, you can find that just the most up-to-date contents for the Cisco certification exam can generate obvious effect. If you obtain the Cisco Cisco exam demos through Pass4sure, you will make yourself well prepared for the exam. Receiving certified is no problem with the help of Pass4sure.

2017 Jan pass4sure 642-832 tshoot:

Q1. The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 

Use the supported commands to isolated the cause of this fault and answer the following questions. 

On which device is the fault condition located? 

A. R1 

B. R2 

C. R3 

D. R4 

E. DSW1 

F. DSW2 

G. ASW1 

Answer: A


Q2. The implementations group has been using the test bed to do a ‘proof-of-concept’. After several changes to the network addressing, routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2(2026::102:1). 

Use the supported commands to isolated the cause of this fault and answer the following questions. 

The fault condition is related to which technology? 

A. NTP 

B. IPv4 OSPF Routing 

C. IPv6 OSPF Routing 

D. IPv4 layer 3 security 

Answer: C


Q3. The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 

Use the supported commands to isolated the cause of this fault and answer the following questions. 

The fault condition is related to which technology? 

A. BGP 

B. NTP 

C. IP NAT 

D. IPv4 OSPF Routing 

E. IPv4 OSPF Redistribution 

F. IPv6 OSPF Routing 

G. IPv4 layer 3 security 

Answer: G


Q4. Which three management categories are contained in the FCAPS network maintenance model? (Choose three.) 

A. Config 

B. Fault 

C. Storage 

D. Accounting 

E. Redundancy 

F. Telecommunications 

Answer: ABD


Q5. The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 

Use the supported commands to isolated the cause of this fault and answer the following questions. 

On which device is the fault condition located? 

A. R1 

B. R2 

C. R3 

D. R4 

E. DSW1 

F. DSW2 

G. ASW1 

Answer: A


Avant-garde ccnp 642-832:

Q6. You enabled CDP on two Cisco Routers which are connected to each other. The Line and Protocol status for the interfaces on both routers show as UP but the routers do not see each other a CDP neighbors. Which layer of the OSI model does the problem most likely exist? 

A. Physical 

B. Session 

C. Application 

D. Data-Link 

E. Network 

Answer: D


Q7. What is the result of configuring the logging console warning command? 

A. Messages with a severity level of 4 and higher will be logged to all available TTY lines. 

B. Only warning messages will be logged on the console. 

C. Warning, error, critical, and informational messages will be logged on the console. 

D. Warning, critical, alert, and emergency messages will be logged on the console. 

E. The logging console warning command needs to be followed in the configuration with logging buffered byte size to specify the message buffer size for the console. 

Answer: D


Q8. The implementations group has been using the test bed to do a ‘proof-of-concept’. After several changes to the network addressing, routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2(2026::102:1). 

Use the supported commands to isolated the cause of this fault and answer the following questions. 

What is the solution to fault condition? 

A. Under the interface Serial 0/0/0.23 configuration enter the ipv6 ospf 6 area 0 command. 

B. Under the interface Serial0/0/0.12 configuration enter the ipv6 ospf 6 area 12 command. 

C. Under ipv6 router ospf 6 configuration enter the network 2026::1:/122 area 0 command. 

D. Under ipv6 router ospf 6 configuration enter no passive-interface default command. 

Answer: A


Q9. What are two approaches to maintaining a network?(Choose two.) 

A. PPDIOO 

B. structured 

C. bottoms up 

D. interrupt-driven 

Answer: BD


Q10. The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 

Use the supported commands to isolated the cause of this fault and answer the following questions. 

The fault condition is related to which technology? 

A. BGP 

B. NTP 

C. IP NAT 

D. IPv4 OSPF Routing 

E. IPv4 OSPF Redistribution 

F. IPv6 OSPF Routing 

G. IPv4 layer 3 security 

Answer: A